We bet you are trying to decide what kind of faucets you should install in your home and got a lot of recommendations for wall mount faucets.
But you are in a pickle right now because you don’t know what they are. No need to scratch your head over it, we got you covered.
So, the question is, what is a wall-mounted faucet?
Wall-mounted faucets are those which are mounted to the wall. Yes, they are exactly how they are advertised.
Wall mount faucets are mainly used in homes and places with small spaces. They are also widely used because of their modern outlook.
This article has covered a lot more than this. So let’s dive in and get to learn immediately.
What Is a Wall-Mounted Faucet?
Wall mount faucets are exactly what it sounds like. It is the type of faucet that is mounted to the wall. Wall-mounted faucets are often seen in the kitchen and bathrooms of schools, medical and commercial places.
Nowadays people are using this faucet in their house too due to small spaces. Wall mount faucets are widely popular because of their modern designs and the chic outlook that they provide.
Are Wall-Mounted Faucets Better?
Actually, yes. Wall mount faucets are better if you get to know how easy those are to use and clean.
Wall mount faucets are installed over sinks and as those are mounted to the wall, you don’t need to spend a lot of time cleaning the faucets.
Just a regular wipe down will do the work. And for deep cleaning, consulting a professional once in a while will be enough.
Wall mount faucets don’t take up a lot of space. So, if you have small space in your kitchen and bathroom but you badly need a double-ended faucet, a wall mount is the one to the rescue.
And yes, they come with a stylish modern outlook so your kitchen and bathroom are going to look top-notch. If you already have a supply line supported for wall mount faucets, then you can easily install those.
It doesn’t require high-level plumbing knowledge to install those. But if you are not so good with fitting, then consulting a plumber will be a wise decision.
Are Wall-Mounted Faucets More Expensive?
Definitely, yes. Wall mount faucets installation costs thirty percent more than deck mount faucets because of the tricky installation procedure.
You will have to keep at least 200 to 600 dollars in your hand just to install the faucets. And the buying faucet cost is extra.
To install your wall mount faucets, you will need to break down your wall and install a water supply line supported for wall mount faucets.
Usually, this supply line isn’t installed while building a house, so you need to install it while you decide to use wall mount faucets.
The procedure is tough and tricky and needs to be done perfectly, otherwise, you will have to face a terrible water leakage problem which will end up costing you even more money to fix all the damages.
Or in the worst-case scenario, your faucet won’t get a water supply, hence you will get no water. Wall mount faucets have a very modern, luxurious look, that’s another reason for them being too pricey.
So, even if it will burn a hole in your pocket, the faucets will help increase the elegance of your home and define your rich taste in decoration.
So, if you have a deep pocket and don’t mind spending for a luxurious look for your house, you can blindly go for wall mount faucets for your bathrooms and kitchen.
How Do You Install a Wall-Mounted Faucet?
We have already mentioned that it is pretty easy to install a wall mount faucet. But you may still need a little guidance to install the faucets.
Here is a simple procedure you can follow while you are installing a wall mount faucet all by yourself.
- Before getting started, shut off the main water supply.
- Assemble the right tools for the job such as drill, ⅛” drill bit, hacksaw, level, tape measure, and safety glasses.
Determine Valve Placement and Install the Crossmember
- Based on the trim and the sink you are installing, determine where the valve should be positioned in the wall. It is recommended that you should place the spout outlet a minimum of three inches above the sink rim.
- Place the cross-member between the studs and make sure it’s level and positioned for your wall thickness. For wall thicknesses ½ inch to one and a half inches. The front of the cross-member should be two inches back from the front side of the vertical stud.
- If the wall thickness is greater than one and a half inches, the cross-member should be three and a half inches back from the planned front of the finished wall surface.
- At this point, secure the cross-member.
Attach the Wall Mount Valve to the Crossmember
- Find the midpoint for the faucet outlet. Then measure two inches above the bottom of the cross-member. This is where the center screw should be inserted.
- Drill a ⅛ inch pilot hole and thread the center screw.
- Now hang the valve on the keyhole to free up your hand. This method allows you to level the valve more accurately.
- When leveled, mark the holes for the remaining screws. Then remove the valve and drill the pilot holes.
- Secure the wall mount valve to the cross-member by driving in all four screws.
- Notice the minimum and maximum wall markings on the protective caps. This method will help eliminate installation errors.
Check for Leaks
- Once the supply lines are connected to the valves, check for leaks. Make sure the handle stems are in the off position.
- Remove the protective caps to verify.
- Turn on the main water supply and check for any leaks.
- When you are sure there are no leaks, replace the protective caps.
Installing the Trim
- Start by removing the protective caps.
- Then take the handle adapters and thread each of them by your hand until they are flush and snug against the wall. If you are doing a thick wall installation, insert a handle spline extension into each stem before attaching the handles. Depending on the wall thickness, you may need to handle spline extension.
- Attach each handle by rotating it until tight. For added flexibility, the spout shank is adjustable from a half-inch to one and half-inch to accommodate any wall thickness.
- Loosen the wall screw and adjust the shank for wall thickness. The set screw hole should be flush with the front of the finished wall.
- Tighten the set screw until it’s secure. Apply the gasket to the spout, the slot should point downward. Slide the spout onto the shank and tighten close to the wall.
- Thread the set screw then finish tightening the spout so it’s flush to the wall. Secure the spout in the palace by driving a set screw into the shank. And voila, you have installed your wall mount faucet.
Upsides and Downsides of Using Wall-Mounted Faucets
It is important that you know about all the upsides and downsides of using a wall mount faucet before buying them because money doesn’t grow on trees and they are pretty expensive.
Let’s see the pros and cons of using wall mount faucets.
Hope the article helped you know about what is a wall-mounted faucet. Now you can decide if you want to install them in your house or go for different ones.
But whichever one you decide, always pick the best one out there. Because buying stuff for your home is an investment. Even if they cost a lot, they will save you money in the long run.